XG1.U

Product introduction

It can be widely used in department of stomatology and ophthalmology, operating room and other medical institutions. It is suitable for all wrapped or unwrapped solid instruments, A-class cavity instrument (dental hand-pieces and endoscopes), implantable instruments, dressing fabric and rubber tubes, etc.

Product features

Equipped with professional and systematized sterilizing programs of fabric, instrument, rubber, liquid, cavity, testing and auxiliary programs of BD, PCD and leakage.

Temperature, pressure, time, running status, failure warning liquid-crystal display.

Intelliqgentized drying system to guarantee the residual humidity of instrument and dressing no more than 0.2% and 1% respectively.

Build-in efficient steam generator, microcomputer temperature control, time and energy saving.

Equipped with printer to print date, time and process parameters.

Over-heat auto protection device, dual door safety lock device overpressure relief valve, short-circuit protection, and overpressure protection.

Perfect four-level authority management system to avoid misoperation.

Technical parameters

image.png

XG1.C

Product introduction

It is applicable for the sterilization of unpacked solid instrument in department of stomatology, ophthalmology, operation room and CSSD.

Product features

Touch screen display of temperature, pressure, time, running status and failure warning

Equipped with professional and systematized sterilizing programs of fabric, instrument, rubber and liquid

The positive pressure air-discharging system will effectively discharge the cold air from chamber to improve steam saturability

Build-in efficient steam generator, microcomputer temperature control, time and energy saving

Equipped with post-drying function which makes the residual humidity of sterilized articles less than 3%

Equipped with printer to print date, time and process parameters

Over-heat auto protection device, dual door safety lock device, overpressure relief valve, short-circuit protection and overpres sure protection.

Perfect four-level authority management system to avoid misoperation.

Technical parameters

image.png


MAST-C

Product introduction

MAST-C series is one of the economic sterilizers which are suitable for smaller hospital and medical centers. It is researched according to the latest requirements of medical institution and CSSD

Product features

Low working noise, high vacuum limit.

Equipped with water saving without pressure cooling system. The draining water temperature blow 65 C during normal working process.

Equipped with professional and systematized sterilizing programs of fabric, instrument, rubber, liquid, cavity, testing and auxiliary programs of BD, PCD and leakage.

Temperature, pressure, time, running status, failure warning liquid-crystal display Intelligent drying system to guarantee the residual humidity of instrument and dressing no more than 0.2% and 1% respectively

Build-in efficient steam generator, microcomputer temperature control.time and energy saving

Equipped with printer to print date, time and process parameters

Over-heat auto protection device, dual door safety lock device.overpressure relief valve, short-circuit protection, and overpressure protection

Perfect four-level authority management system to avoid mis-operation.

Technical parameter

image.png


CLASS B

Product Introduction

MOST-T series: T18/24/45/80 is a Class B tabletop sterilizer. As a type of high pressure sterilizer it takes steam as its sterilization medium which is fast, safe and economic. They are common used in stomatological department, ophthalmological department, operating room and CSSD to make the sterilization for warped or unwrapped instrument, fabric, utensils, culture medium, unsealed liquid etc. The design of chamber accords with state GB1502011, GB8599-2008, CE and EN285 standard


image.png

Product features

Built-in open-type water tank

Brand-new display interface

Multiple safety protection devices

Automatic door structure

Efficient vacuum

A variety of programs

Efficient Steam generator

Technical parameters


image.png


CLASS S

Product Introduction

MOST-T series: T24-S/45-S/80-S is a Class S tabletop sterilizer. As a type of high pressure sterilizer, it takes steam as its sterilization medium which is fast, safe and economic. They are common used in medical health care institution or R & D institution to make the sterilization for warped or unwrapped instrument, fabric, utensils, culture medium, unsealed liquid, etc. The design of chamber accords with state GB1502011, GB8599-2008, CE and EN285 standard.

image.png


Product features

Built-in open-type water tank

Brand-new display interface

Multiple safety protection devices

Automatic door structure

A variety of programs

Efficient Steam generator

Technical parameters

image.png

    image.png